|
|
| Table Size |
152x460mm(6"x18") |
Longitudinal
Movement of Table
(Max.travel,infinitely
variable) |
60HZ,5-28m/min,50HZ,5-23m/min |
|
Specifications:
|
| 1A: |
Longitudinal Hydraulic. |
| 2A: |
Longitudinal Hydraulic And Crossfeed Motorized. |
| 3A: |
Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized. |
| ASD: |
Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down.
|
| |
|
MODEL |
ESG-1A~2A618 |
| Table Size |
|
152x460mm(6"x18") |
| Max.grinding length |
Longitudinal |
480mm(19") |
| Max.grinding width |
Crosswise |
168mm(6 5/8") |
Max. distance from table surface to
spindle centerline |
460mm(18") |
| Standard magnetic chuck size |
150x450mm(6"x18") |
| Longitudinal movement of table |
Max. travel, hydraulic
Max. travel, manual
Max. travel, infinitely variable |
480mm(19")
510mm(20")
60HZ,5-28m/min,50HZ,5-23m/min |
Cross transverse travel |
Auto transverse increment |
1-10mm(0.04"-0.4") |
| Max. auto transverse travel |
180mm(7") |
|
Max. manual transverse travel |
195mm(7 3/4") |
| Handwheel per revolution |
5mm(0.2") |
| Handwheel per graduation |
0.02mm(0.0005") |
| Wheelhead vertical infeed |
Automatic in feed |
- |
| Step feed (Jog) |
- |
| Rapid travel, Approx |
- |
| Slow travel, Approx. |
- |
| Handwheel revolution |
1mm(0.05") |
| Handwheel graduation |
0.005mm(0.0001") |
| Grinding spindle drive |
Speed |
60HZ,3450 R.P.M.
50HZ,2850 R.P.M. |
| Power rating |
2.0HP |
| Standard grinding wheel |
Diameter |
203MM(8") |
| Width |
12.7mm(1/2"),MAX. 19mm(3/4") |
| Bore |
31.75mm(1 1/4") |
Hydraulic motor |
Power rating |
1HPx6P |
| Crossfeed motor |
Power rating |
40Wx6P |
| Elevating motor |
Power rating |
40Wx6P |
| Floor space |
Total space required |
1810x1133x1660mm(71"x45"x65") |
| Weights |
Net weight, Approx. |
820KGS(1804LBS) |
| Gross weight, Approx. |
970KGS(2134LBS) |
| Rated power, Approx |
|
3.0HP |
| Packing dimensions |
L x W x H |
1940x1400x1930mm(77"x55"x76") |
NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.
| 1.HIGH PRECISION CARTRIDGE WHEEL SPINDLE: |
| High precision cartridge type spindle is supported by two preloaded precision angular contact ball bearings & one NN type Roller bearing and driven by V3 class motor that allow high accurate grinding performance. (618/818 series are driven by 2.0HP motor.) |
|
| 2.HIGH ANTI-WEAR GUIDE WAYS: |
| The saddle rests on precision hand-scraped double V ways, and the table rests on precision hand-scraped V and flat ways which coated with "TURCITE-B". These guide ways are equipped with auto lubrication to resist wear of guide ways, plus lasting accuracy and damping. |
|
| 3.HIGH RIGID CASTING CONSTRUCTION: |
| Machines are casted with high grade casting iron with heavy walls and reinforced ribs to provide excellent rigidity and damping. |
|
| 4.ENLARGED COLUMN AND BASE: |
Enlarged column and base create high stability and rigidity. The height of column is increased up to 18" (460mm) from table surface to the center line of spindle. |
|
| 5.AUTO LUBE SYSTEM: |
| Automatic lubrication system is applied as standard to ensure sufficient lubrication at lead-screws and guide-ways for more longevity. |
|
| 6.LONGITUDINAL & CROSS DRIVE: |
| For all models, except 618 & 818 handfeed, the longitudinal movement is driven by hydraulic system; for 2A, 3A, ASD series, the cross movement is driven by motor for more accurate increment feeding. |
|
|
|
| General Features: |
 |
 |
|
 |
| Spindle For 618, 818 Series |
·Saddle and table |
|
 |
 |
|
| Table Hydraulic Travel Adjusting l |
·Positioning system(for 614) |
|
·Auto lubrcation system |
 |
|
|
|
| ·Cross slice way |
|
|
|
|
Optional Accessores: |
|
Standare Accessories:
| 1.Tool box with tools |
5.Grinding Wheel |
9.Diamond dresser |
| 2.Wheel extract screw & nut |
6.Wheel flange |
10.Crossfed Ballscrew |
| 3.Balancing arbor |
7.Touch-up paint |
|
| 4.Levelling screw with blocks |
8.Auto lubrication system |
|
|
|
|
