EQUIPTOP HITECH CORP.

ESG-818ASD

Table Size

152x460mm(6x18")

Longitudinal
Movement of Table

60HZ,5-28m/min,

50HZ,5-23m/min

CONTROL PANEL		GRINDING PROCEDURES

Plunge & surface modes as standard
Vertical feed driven by stepping motor & AC motor
Vertical jog feed: 0.001mm(0.00005")
Auto-downfeed increment: 0.001-0.04mm(0.00005"-0.002")
Max. Auto-downfeed amount: 9mm(0.45")
Pre-set spark-out: 1-9 times
The wheelhead is raised and the table parks upon completion of the spark-out passes
SPECIFICATIONS

1A:Longitudinal Hydraulic
2A: Longitudinal Hydraulic And Crossfeed Motorized
3A: Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized.
ASD: Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down




MODEL		ESG-818ASD
Table Size		203x460mm(8x18")
Max.grinding length	Longitudinal	480mm(19")
Max.grinding width	Crosswise	228mm(9")
Max. distance from table surface to spindle centerline		460mm(18")
Standard magnetic chuck size		200x450mm(8x18")
Longitudinal movement of table	Max. travel, hydraulic	480mm(19")
	Max. travel, manual	510mm(20")
	Max. travel, infinitely variable	60HZ,5-25m/min,50HZ,5-20m/min
Cross transverse travel	Auto transverse increment	1-10mm(0.04"-0.4")
	Max. auto transverse travel	235mm(9 1/4")
	Max. manual transverse travel	250mm(9 3/4")
	Handwheel per revolution	5mm(0.2")
	Handwheel per graduation	0.02mm(0.0005")
Wheelhead vertical infeed	Automatic in feed	0.001-0.04mm(0.00005-0.002")
	Step feed (Jog)	0.001mm(0.00005")
	Rapid travel, Approx	250mm/min
	Slow travel, Approx	6mm/min
	Handwheel revolution	1mm(0.05")
	Handwheel graduation	0.005mm(0.0001")
Grinding spindle drive	Speed	60HZ,3450 R.P.M.;50HZ,2850 R.P.M.
Grinding spindle drive	Power rating	2.0HP
Standard grinding wheel	Diameter	203MM(8")
	Width	12.7mm(1/2"),MAX. 19mm(3/4")
	Bore	31.75mm(1 1/4")
Hydraulic motor	Power rating	1HPx6P
Crossfeed motor	Power rating	40Wx6P
elevating motor	Power rating	40Wx6P
Floor space	Total space required	1810x1285x1680mm(71"x50 1/2"x66")
Weights	Net weight, Approx.	1205KGS(2651LBS)
Weights	Gross weight, Approx.	1375KGS(3025LBS)
Rated power, Approx		3.0HP
Packing dimensions	L x W x H	1890x1630x1930mm(75"x64"x76")
NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.

General Features:

1.HIGH PRECISION CARTRIDGE WHEEL SPINDLE:

High precision cartridge type spindle is supported by two preloaded precision angular contact ball bearings & one NN type Roller bearing and driven by V3 class motor that allow high accurate grinding performance. (618/818 series are driven by 2.0HP motor.)

2.HIGH ANTI-WEAR GUIDE WAYS:

The saddle rests on precision hand-scraped double V ways, and the table rests on precision hand-scraped V and flat ways which coated with "TURCITE-B". These guide ways are equipped with auto lubrication to resist wear of guide ways, plus lasting accuracy and damping.

3.HIGH RIGID CASTING CONSTRUCTION:

Machines are casted with high grade casting iron with heavy walls and reinforced ribs to provide excellent rigidity and damping.

4.ENLARGED COLUMN AND BASE:

Enlarged column and base create high stability and rigidity. The height of column is increased up to 18" (460mm) from table surface to the center line of spindle.

5.AUTO LUBE SYSTEM:

Automatic lubrication system is applied as standard to ensure sufficient lubrication at lead-screws and guide-ways for more longevity.

6.LONGITUDINAL & CROSS DRIVE:

For all models, except 618 & 818 handfeed, the longitudinal movement is driven by hydraulic system; for 2A, 3A, ASD series, the cross movement is driven by motor for more accurate increment feeding.


Precision Spindle (for 614~818)	Saddle and table

Indexible table handwheel	·Positioning system(for 614)	·Auto lubrcation system

·Cross slice way

Optional Accessores:


Electro Magnetic Chuck	Inclinable Permanent Magnetic Chuck	Coolant System	Dust Collector

Coolant and Dust Unit	Coolant System With Magnetic Separator	Work Lamp	Splash Guard

Wheel Flange	Manual Parallel Dresser	Chuck Control With Demagnetizer	Precision Vice

Punch Former	Balancing Stand (Double Line)	Roller Type Balancing Stand	Digital Readout

Micro Crossfeed (614~818)	Manual Pulse Generator	Permanent Magnetic Chuck	Manual Pulse Generator

Standare Accessories:

1.Tool box with tools	5.Grinding Wheel	9.Diamond dresser
2.Wheel extract screw & nut	6.Wheel flange	10.Crossfed Ballscrew
3.Balancing arbor	7.Touch-up paint
4.Levelling screw with blocks	8.Auto lubrication system