Mitsubishi M64SM(standard) or Fanuc OIMB/MATE(optional)
Max. TravelFox X Axis
mm
1200
Max. TravelFox Y Axis
mm
630
Max. TravelFox Z Axis
mm
550(BT50)
Spindie NoseTo Table
mm
125~725
Table
Table Size
mm
1260X600
tool
24(BT50)
Cutting Feed Rate
mm/min
1-10000
Tool
24(BT50)
Max.Tool Length
mm
300
max Tool Diameter
mm
150(BT50)
Max,Too Weight
kg
12(BT50)
ATC System
Arm type(BT50)
Tool Shank
BT50(optional)
Spindle motor
kw
11KW
Spindle Speed
RPM
6000(BT50)
X/Y/Z Servo Motor
kw(Hz)
3.5/3.5/3.5
Max table Capacity
kg
1800
T-Solt(Center x width x No.)
mm
100 x 18 x5 mm
X Rapid travel
M/min
box way:18
Y Rapid travel
M/min
box way:18
Z Rapid travel
M/min
box way:18
Cuttingg Feed Rate
mm/min
1-10000
Mitsubishi
64Sm
Machine Weight
kg
8600
Power requirement
KVA
35
Air Requirement
kg/cm2
6
NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown here are forreference only.
General Features:
MITSUBISHI CONTROLLERS:
*M64SM SEREIS
*MS65SM SEREIS
FANUC CONTROLLERS:
*Oi-MC SERIES
*18i-MC SEREIS
SIEMENS CONTROLLERS:
*SINUMERIK 810D
*SINUMERIK 840D
The dynamic balancing instrument calibrates the spindle displacement,velocity and acceleration of the full speed range.
The Renishaw ball bar instrument calibrates the circularity and the geometrical accuracy to ensure percies three-dimensional motions.
The full travel strok is inspected and compensated by Laser measurement. The motion accuracy can be ensured.
Double chip auger can easily take and screw the chip cart, This will help to create perfect working and machine conditions.
Work Lamp is well located for operator's set up and measurement
High-pressure pump,due to its high efficiency and coolant pressure can easily take the chips to the chip auger.
The operator could easy to load/unload tools from spindle to increase the efficient.
The maze design and fully enclosed telescopic cover prevent chips and coolant water from going into Ballscrew and guide way.
M30 function is especially useful for the long processing workpiee. M30 is put at the last statement of the NC program;when the NC program is completed,the machine can be powered off automatically. There is no need for operator to wait and switch off the power.
The innovatine cam drive mechanism results in the unique ATC. The bi-irectional tool selection is achieved by PLC software rogramming. The fast ACT saves non-cutting time. The cam driven tool magazine ensures rotation accuracy, and smooth motion while full tools loading.(Arm type only)
Simplified magazine construction, safety easy maintains and trouble-free operation.
The dynamic balancing instrument calibrates the spindle displacement. Velocity and acceleration of the full speed range
To separate oil and coolant, the lubrication oil and the coolant. The coolant quality will last long and the machining quality will be guaranteed
The control panel meets the safety requirement and rotates easily for operation. The automatic diagnosis function displays the malfunction on screen for quick troubleshooting. The portable MPG for easing workpiece set up. The pendent arm is designed for easing control panel operation. The touch switch. diagram and text on screen make the operation very convenient.
3 Axes High rigidity Box Ways
Long Span Machine Structure
X Axis φ45 mm Ballscrew
Z Axis φ45 mm Ballscrew
Optional Accessores:
Controller Color screen.
The fast simple and long-life automatic tool changer provides stable and reliable tool change.(optional)
Spindle splash nozzles on the ring surround the spindle. The splash coolant takes away heat from tools and workpiece to increase the cutting accuracy.
Coolant through ballscrew system. The system controls the ballscrew temperature rise through an automatic lubrication unit This enables both cutting accuracy and long operation time.
Spindle oil cooling device is located on the machine which is beneficial because if reduces floor space.
The spindle is free from thermal effect of main motor. The thermal elongation is reduced and the spindle accuracy and service life can be ensured. The application of spindle oil cooling system can increase the spindle accuracy. The spindle is directly coupled to main motor. No belt or gear is used. The noise, backlash and vibration effects are dramatically reduced. The transmission effciency is increased due to the direct rotation by the main motor.
infrared tools broken detection device. It can inspedt the tool's tiny brake before machining. When tool brake is detected. the device transmits a signature to NC controller to stop the operation. The detection device initiates the beacon's horn to notify the operator.
The voltage 380, 415 is available for user's local regulation. The transformer is located on the machine. It saves floor space. The wiring and protection meets CE standard.
Equipped with the 4th axis table. the machine can execute the multi dimensional cutting to reduce loading/unloadinfg time of the workpicec. The indexing capability is especially suitable for screw cutting or any kind of complicated machining.
automatic voltage stabilizer:Input voltage available:110/220/380V,frequency 50/60HZ. The output voltage is stable within+/-1%.The oberload protection is as standard. The low/high voltage and overshoot protection is as standard. The system has the capability of power-off delay while sudden power trip. The 30% phase deviation can be smoothed within2%.
Disc oil/coolant separator. This unit is easily installed and is an optimal space saver. The unit efficiently separates the oil from the coolant tank. The coolant quality, life and workpiece accuracy will be increased.
A simple but efficient removal mechanism can easily convey the chips outside of the machine.
The floating draw bar mechanism is applied. The toolunclampling force will not transmit to the spindle bearing This extends the spindle bearing service life.
Convenient & simple and easy to use tool stand including tool-locked device.
Safety door interlock without the door closed,the programmed operation will not begin. This ensures the operatir's safety. Opening the door during machining will cause an emergency stop.
Programmable cooling nozzle can be easily cintrolled and adjusted by NC M-code, The nozzle Position automatically corresponds to each tool. Due to its step-less orientation capability,the programmable cooling nozzle directly points to the tool end.
