| CONTROL PANEL
| |
| 
ACUMEN FEATURES
|
|
1. C5 class ballscrew and servo motor for vertical transmission.Digital control by Equiptop designed program with MitsubishiPLC. Selection menu for Equiptop surface and plunge grinding,mechanical coordinates, working coordinates, grinding control points, input and output points...etc.
|
|
2. Auto wheel dressing and compensation system on table.Table positioning on left side for wheel dressing.
|
|
3. Digital readout feedback for cross positioning setting. Three-section setting value for cross movement to fit rough,finish, and micro grinding. |
|
4. Spindle seat with water cooling system to ensure stability ofaccuracy.
|
|
5. Three axes fully automatic surface grinding with NC control. Servo system for vertical transmission. 16-color touch screen, spindle current meter, and magnetic power volt meter.
|
|
6. Minimum setting value for vertical downfeed is 0.0001mm. |
| 7. Minimum display value for cross movement is 0.001mm.
|
8. Optional wheelhead auto wheel dressing and compensation system or diamond forming dressing and compensation system.
|
9. Humanized man-machine touch screen.
|
| SPECIFICATIONS
|
|
|
| |
| |
| |
| |
MODEL |
ACUMEN 500 |
| Table Size |
|
254x508mm(10x20") |
| Max.grinding length |
Longitudinal |
520mm(20 1/2") |
| Max.grinding width |
Crosswise |
280mm(11") |
Max. distance from table surface to
spindle centerline |
500mm |
| Standard magnetic chuck size |
250x500mm(10x20") |
| Longitudinal movement of table |
Max. travel, hydraulic |
580mm(22 3/4") |
| Max. travel, manual |
620mm(24 3/8") |
| Max. travel, infinitely variable |
60HZ,0.2-36m/min,50HZ,0.2-32m/min |
| Cross transverse travel |
Auto transverse increment |
1-13mm(0.04"-0.5") |
| Auto constant feeding speed |
60-320mm/min |
| Max. auto transverse travel |
270mm(10 5/8") |
| Max. manual transverse travel |
300mm(11 3/4") |
| Handwheel per revolution |
5mm(0.2") |
| Handwheel per graduation |
0.02mm(0.001") |
| Wheelhead vertical infeed |
Automatic in feed |
ROUGH GRINDING0.001-0.05mm FINISHING GRINDING 0.0001-0.009 mm |
| Manual pulse generator (per graduation) |
0.001mmx1. 0.001mmx10. 0.001mmx100 |
| Min Setting value |
0.001mm/min |
| Rapid travel, Approx |
150mm/min |
| Grinding spindle drive |
Speed |
60HZ,3450 R.P.M.;50HZ,2850 R.P.M. |
| Power rating |
3.0HP |
| Standard grinding wheel |
Diameter |
203MM(8") |
| Width |
19mm(3/4"),MAX.25mm(1") |
| Bore |
31.75mm(1 1/4") |
| Hydraulic motor |
Power rating |
2.0HP |
| Crossfeed motor |
Power rating |
500W/DCV |
| elevating motor |
Power rating |
750W/DCV |
| Floor space |
Total space required |
2400x1450x1750mm(94 1/2"x57"x68 1/2") |
| Weights |
Net weight, Approx. |
1810KGS(3982LBS) |
| Gross weight, Approx. |
2160KGS(4752LBS) |
| Rated power, Approx |
|
5.5HP |
| Packing dimensions |
L x W x H |
2480x2060x2100mm(98"x81"x83") |
| NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference. |
