ESG-84CNC |
 |
| Table Size |
245x508mm |
| MAX.distance from table surface to spindle centerline |
720 |
| CONTROL PANEL |
|
 |
|
| GRINDING PROCEDURES |
|
 |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| MORE.... |
|
Specifications: |
MODEL |
CNC500 |
| Table Size |
400x900 |
MAX.grinding length
|
Longitudinal |
800 |
MAX.grinding width
|
Crosswise |
400 |
| MAX.distance from table surface to spindle centerline |
720 |
| Standard magnetic chuck size |
400x800 |
| T-Slot x pcs |
12x3 |
| Longitudinal movement of x axis table |
Max.travel,hydraulic |
1000 |
| Table feeding Speed |
10~25000 mm/min |
| Min.feed rate |
0.001 |
| Cross transverse travel of Z axis column |
Max.transverse travel |
460 |
| Table feeding Speed |
0~4000mm/min |
| Min.feed rate |
0.001 |
| Vertical in-feed of Y axis wheel |
Max.in-feed travel |
600 |
| Table feeding speed |
0~4000mm/min |
| Min.feed rate |
0.001 |
| Gringding wheel |
Size |
405x50x127 |
| Spindle speed |
1750/1450 |
| Motor |
Grinding spindle drive |
15HP(11KW) |
| X axis motor |
1.5KW |
| Y axis motor |
2KW |
| Z axis motor |
2KW |
| Weight |
Net weight,approx |
6000Kg |
| Gross weight approx |
6500Kg |
| NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference. |
|
| General Features: |
1.The large all cast iron,single piece base design, it can support the entire saddle,table and column assembly
and offers superior rigidity and stable;
2.Close-loop feedback provided by linear scales on X/Y/X axis locating accuracy to increase machining assures,machining accuracy and efficiency;
3.X/Y/Z axis equipped C3 class ballscrew and used AC servo motor which drives directly and intelligent software servo can realize high speed consistent machining with high frequency response |
|
|
|
