EQUIPTOP HITECH CORP.

EMV-860 / 1020

                          
                          EMV-860
                          EMV-1020

                          Table Size 

                          910 x 560mm
                          1100 x 560 mm 
                        

                          Max. Travel for X Axis 

                          860 mm 
                          1020 mm
                        

                          Max. Travel for Y Axis

                          560 mm 
                          560 mm
                        

                          Max. Travel for Z Axis

                          600 mm 
                          600 mm 
                        

SPECIFICATION :

	Item	Unit	EMV-860	ETM-1020
Travel	Max. Travel for X Axis	mm	860	1020
	Max. Travel for Y Axis	mm	560	560
	Max. Travel for Z Axis	mm	600	600
	Spindie Nose To Table	mm	150 - 750
Spindle	Spindle Speed	rpm	8000；10000（optional）/ 12000（optional）
ATC System	Tool Q'ty	PCS	Armless type16T / Arm type 24T (optional)
	Max. Tool Diameter	mm	120	120
	Max. Tool Length	mm	300	300
	Max. Tool Weight	kg	6	6
	Tool Shank		BT40	BT40
Motor	Spindle Motor	kw（HP）	7.5 / 11KW	7.5 / 11KW
Motor	X / Y / Z Servo Motor	kw	2.0 / 2.0 / 3.5	2.0 / 2.0 / 3.5
Table	Table Size	mm	910 x 560	1100 x 560
	Max . Table Capacity	kg	800	1000
	T-slot(Center x Width x No.)	mm	100 x 18 x 5	100 x 18 x 5
Feed Rate	X Rapid teavel	M / mm	36 linear
	Y Rapid teavel	M / mm	36 linear
	Z Rapid teavel	M / mm	24 linear
	Cutting feed rate	mm / min	1 - 10000	1 - 10000
Controller	Mitsubishi		64SM	64SM
Other	Machine Weight	kg	5800	6300
Other	Power Requirement	KVA	20	20
Coolant Water （L）	Air requirement	kg / c㎡	6	6
NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown here are forreference only..

Standard Accessories:

1.Fully enclosed guard	7. Work light	13. Mechanical oil & coolant separator
2.Chip auger	8. Alarm light	14. Armless type ATC system (16T)
3. Spindle air seal system	9. Portable air gun / Portable flush gun	15. 3 axes telescopic covers
4.Auto lubrication system	10. Mechanical / Electrical operation manual	16. RS-232 Transmission
5.Leveling block & screws	11. Rigid tapping	17. Central guided counterweight mechanism
6. Tool box	12. Electric box heat exchanger	18. M30 auto power off

Optional Accessories:

1. Spindle programmable air blow	6. Spindle direct drive (I.D.D) transmission	11. Oil demister
2. Fanuc / mitsubishi / Siemens controller	7. 3 axes Linear scale	12. Disc Oil / coolant separator
3. Wash down system	8. Spindle oil cooling system	13. Arm type Atc system 24T
4. 4th rotary table	9. Tool probe system	14. X/Y/Z axis roller type linear way
5. Spindle 10000 / 12000 /15000/18000 R.P.M.(BT-40)	10. Auto tool length measure	15. Spindle ring splash


Infrared tools broken detection device, It can inspect the tool's tiny trake before machining. When tool brake is detected, the operation,The detection device initiates the beacon's horn to notify the operator. (optional)		Equipped with the 4th axis table, the machine can execute the multi dimensional cutting to reduce loading / unloading time of the workpiece. the indexing capability is especially suitable for screw cutting or any kind of complicated machining (optional)

The innovatine cam drive mechanism results in the unique ATC. The bi-directional tool selection is achieved by PLC software peogramming. The fast ATC saves non-sutting time.The cam driven tool magazine ensures rotation accuracy,and smooth motion while full tools loading.(Arm type only)		The machine is equipped with an axis collision protection device which can absorb and reduce the collision force.

MITSUBITSU Controller M70A (64-SM / 65-SM)		FANAC Controller 18i-MB(21i-MB / 0i - MC)