EQUIPTOP HITECH CORP.

ETM-510 APC

Table Size	600X360mm
Max. Travel Fox X Axis	510mm
Max. Travel Fox Y Axis	400mm
Max. Travel Fox Z Axis	300;450(Optional arm type Attached)

Specifications:

MODEL

ETM-510

Controller

Mitsubishi

M64SM(standard)

Fanuc

OIMB/MATE(optional)

TRavel

Max. Travel Fox X Axis

510mm

Max. Travel Fox Y Axis

400mm

Max. Travel Fox Z Axis

300;450(Optional ) arm type (Attached)

Spindie Nose To Table

135-435mm

Spindie Center To Column

420mm

LTable

Table Size

600X360mm

Max.Table Capacity

250kgs

T-Solt(Center x width x No.)

100 x 18x 3 mm

Table height from floor

800mm

Spindle

Spindle Motor

3.7;5.5kw

(Optionl)

5.5kw

Spindie Taper

BT 30

Spindie peed

rpm 240-8000;10000,12000

(Optional)

Feed Rate

X / Y / Z Servo Motar

0.5/0.5/1

X / Y / Z Rapid Traverse

36/36/30;48/48/48

(Optional)

Cutting feed rate

1-10000

ATC System

Tool Shank

BT30 MAS403

Pull Stud

P30T-1(45°)

Tool Qt'y

Turret type type12T;Arm type20T(optional)

Max,Tool Diameter

65mm

Max,Too Length

200mm

Max,Too Weight

3kg

Tool Change Time (T-T)

1.9sec [turretTYPE]

Tool Change time (c-c)

4.8/150mm[turret type]

Dimension

Floor Space Requirement

2150 x 1550 x1860 mm

Machine Height

1860mm

Machine Weight

2800kgs

Other

Air Requirement

6kg/cm2

Power Requirement

10kva

Motor for Coolant Water

1/2hp

NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown here are forreference only.

Specifications:

General Features:


· Convenient shelf for operator's equipment or work piece.	Chips Wash down removal mechanism for quich cheaning.

Convenient storage aera for operator's equipment.	· A simple but efficient removal mechanism can easily move the chips to rear side of the machine	Air pressure counterweight mechanism to uplift for Z axis screw and motor.

Arm type ATC 20 tools: The fast, simple and long-life automatic tool changer provide stable and reiabe tool chang.	Turret type ATC 12 tools:Simplified magazine construction, safety,easy maintence and trouble-free operation.	The dynamic balancing instrument calibrates the spindle displacement. Velocity and acceleration of the full speed range

Optional Accessores:


Convenient sheet clip could clamp the docutments or records.	The full travel strok is inspected and compensated by laser measurement. The motion accuracy can be ensured.	Casting iron hardness checking to ensure the machines quality.

The testing device monitors multiple points on the spindle form low speed to maximum spindle speed. The necessary test run is performed before installing it on the machines.	The parts are inspected by 20 & 3D measuring device.	After spindle assembly. The dynamatic balancing device calibrates the spindle vibration characteristic.

High precision and premium quality Germany linear ways (optional) with wide blocks to resist wear, ensure high accuracy,excellent rigidity.	The machine is equipped with an axis collision protection device which can absorb and reduce the collision force.	Enlarged coolant tank capacity can take away generated chip heat quickly and chip remonal to chip box easy to clean.

Standare Accessories:

Chip auger	6.Work lamp	11Rigid Tapping
2.Full enclosed guard	7Alam light	12.Crossfed Ballscrew
3Auto lubrication system	8Port Air gun	13Electric box heat exchanger
4Levelling block &scerws	9Z axis with Brake	14Armless type ATC system
5Tool box with tools	10Portable flush gun