ETM-510 |
 |
| 工作台面積 |
600X360mm |
| X軸行程 |
510mm |
| Y軸行程 |
400mm |
| Z軸行程 |
300;450(Optional arm type Attached) |
|
|
| 機能規格: |
MODEL |
ETM-510 |
| 行程 |
X軸行程 |
510mm |
| Y軸行程 |
400mm |
| Z軸行程 |
300;450(Optional arm type Attached) |
| Spindie Nose To Table |
135-435 |
| 工作台 |
工作台面積 |
600X360mm |
| 工作台最大荷重 |
250 |
| T型槽(槽 x寬 x中心距) |
100 x 18 x 3 mm |
| Table height from floor |
800 |
| Spindle |
主軸馬達 |
3.7;5.5kw (Optionl) |
| Spindie Taper |
BT 30 |
| Spindie Speed |
rpm 240-8000;10000,12000 (Optional) |
| Feed Rate |
X / Y / Z 軸馬達 |
0.5/0.5/1 |
| X / Y / Z Rapid Traverse |
36/36/30;48/48/48 (Optional) |
| 切削進給速度 |
1-10000 |
| ATC System |
刀具規格 |
BT30 |
| 可用最大刀具直徑 |
MAS403 P30T-1(45) |
| Tool Qt'y |
Turret type type12T |
| 可用最大刀具直徑 |
65mm |
| 最大刀具長度 |
200mm |
| 最大刀具重量 |
3 |
| Tool Change Time (T-T) |
1.9sec [turret type]
|
| Tool Change time (c-c) |
4.8/150mm [turret type] |
| Dimension |
Floor Space Requirement |
2150 x 1550 x 1860 mm |
| 機器高度 |
1860mm |
| 機器重量 |
2800kgs |
| Other |
空壓源 |
6kg/cm2 |
| 電源需求量 |
10kva |
| Motor for Coolant Water |
1/2hp |
| NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown here are forreference only. |
|
| 機械特性： |
|
| 選購附件： |
|
Standare Accessories:
| Chip auger |
6.Work lamp |
11Rigid Tapping |
| 2.Full enclosed guard |
7Alam light |
12.Crossfed Ballscrew |
| 3Auto lubrication system |
8Port Air gun |
13Electric box heat exchanger |
| 4Levelling block &scerws |
9Z axis with Brake |
14Armless type ATC system12T:ETM-510] |
| 5Tool box with tools |
10Portable flush gun |
|
|
|
|
